VRRP
Router Configuration Guide 393
priority 200 explicit
exit
lag-port-down 1
number-down 3
priority 50 explicit
exit
exit
host-unreachable 10.10.24.4
drop-count 25
exit
route-unknown 10.10.0.0/32
priority 50 delta
exit
exit
----------------------------------------------
The following example displays a sample configuration of a VRRP policy for the 7750 SR
and 7950 XRS:
A:SR2>config>vrrp>policy# info
----------------------------------------------
delta-in-use-limit 50
priority-event
port-down 4/1/2
hold-set 43200
priority 100 delta
exit
port-down 4/1/3
priority 200 explicit
exit
lag-port-down 1
number-down 3
priority 50 explicit
exit
exit
host-unreachable 10.10.24.4
drop-count 25
exit
route-unknown 10.10.0.0/32
priority 50 delta
protocol bgp
exit
exit
----------------------------------------------
VRRP IES Service Parameters
VRRP parameters are configured within an IES service with two contexts, owner or non-
owner. The status is specified when the VRRP configuration is created. When configured as
owner, the virtual router instance owns the backup IP addresses. All other virtual router
instances participating in this message domain must have the same vrid configured and
cannot be configured as owner.
To Next Page
Loading...
