Alcatel-Lucent 7450 - Ipv6 Filter Policy Commands

Filter Configuration Command Reference
512 Router Configuration Guide
— src-ip{ip-address/mask | ip-address ipv4-address-mask | ip-prefix-list
prefix-list-name}
—no src-ip
— src-port {lt | gt | eq} src-port-number
— src-port port-list port-list-name
— src-port range src-port-number src-port-number
—no src-port
— src-route-option {true | false}
—no src-route-option
— tcp-ack {true | false}
—no tcp-ack
— tcp-syn {true | false}
—no tcp-syn
— pbr-down-action-override {drop | forward | filter-default-action}
—no pbr-down-action-override
— sticky-dest hold-time-up
— sticky-dest no-hold-time-up
—no sticky-dest
— filter-name filter-name
—no filter-name
— renum old-entry-id new-entry-id
— scope {exclusive | template | embedded | system}
—no scope
— shared-radius-filter-wmark low low-watermark high high-watermark
—no shared-radius-filter-wmark
— sub-insert-credit-control start-entry entry-id count count
—no sub-insert-credit-control
— sub-insert-radius start-entry entry-id count count
—no sub-insert-radius
— sub-insert-shared-pccrule start-entry entry-id count count
—no sub-insert-shared-pccrule
— sub-insert-shared-radius start-entry entry-id count count
—no sub-insert-shared-radius
— sub-insert-wmark low low-watermark high high-watermark
—no sub-insert-wmark
IPv6 Filter Policy Commands
These commands do not apply to the 7450 ESS (except in mixed mode).
config
—filter
— ipv6-filter filter-id [create]
— ipv6-filter {filter-id | filter-name}
—no ipv6-filter {filter-id | filter-name}
— chain-to-system-filter
—no chain-to-system-filter
— default-action {drop | forward}
— description description-string
—no description
— embed-filter filter-id [offset offset] [{active | inactive}]