Filter Policies
Router Configuration Guide 533
Description This command inserts point information for credit control for the filter.
The no form of the command reverts to the default.
Default no sub-insert-credit-control
Parameters entry entry-id — Identifies a filter on this system.
Values 1 to 65535
count count — Specifies the count.
Values 1 to 65535
sub-insert-radius
Syntax sub-insert-radius start-entry entry-id count count
no sub-insert-radius
Context config>filter>ip-filter
config>filter>ipv6-filter
Description This command inserts point information for RADIUS for the filter.
The no form of the command reverts to the default.
Default no sub-insert-radius
Parameters entry entry-id — Specifies at what place the filter entries received from RADIUS will be inserted
in the filter.
Values 1 to 65535
count count — Specifies the count.
Values 1 to 65535
sub-insert-shared-pccrule
Syntax sub-insert-shared-pccrule start-entry entry-id count count
no sub-insert-shared-pccrule
Context config>filter>ip-filter
config>filter>ipv6-filter
Description This command defines the range of filter and QoS policy entries that are reserved for shared entries
received in Flow-Information AVP via Gx interface (PCC rules – Policy and Charging Control). The
no form of this command disables the insertion, which will result in a failure of PCC rule installation.
Default no sub-insert-shared-pccrule
To Next Page
Loading...
