Show, Monitor, Clear, and Debug Command Reference
448 Router Configuration Guide
Command Descriptions
Show Commands
instance
Syntax instance
instance [interface interface-name [vrid virtual-router-id]]
instance interface interface-name vrid virtual-router-id ipv6
Context show>vrrp
Description This command displays information for VRRP instances.
If no command line options are specified, summary information for all VRRP instances displays.
Parameters interface ip-int-name — Displays detailed information for the VRRP instances on the specified
IP interface including status and statistics.
Default Summary information for all VRRP instances.
vrid virtual-router-id — Displays detailed information for the specified VRRP instance on the IP
interface.
Default All VRIDs for the IP interface.
Values 1 to 255
ipv6 — Specifies the IPv6 instance.
Output VRRP Instance Output — The following table describes the instance command output fields for
VRRP.
Table 39: VRRP Instance Output Field Descriptions
Label Description
Interface name The name of the IP interface.
VR ID The virtual router ID for the IP interface
Own
Owner
Yes
Specifies that the virtual router instance as owning the virtual router IP
addresses.
No
Indicates that the virtual router instance is operating as a non-owner.
To Next Page
Loading...
