Alcatel-Lucent 7450 - Clear Commands

Show, Clear, and Debug Command Reference
352 Router Configuration Guide
Set Dont Fragment : true
Failover
State : not-applicable
Recovery Conn ID : N/A
Recovery state : recovery-tunnel
Recovered Conn ID : 433324032
Recovery method : default
Track SRRP : (Not specified)
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
No. of tunnels: 2
===============================================================================
Clear Commands
The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
router
Syntax router router-instance
Context clear>router
Description This command clears for a the router instance in which they are entered.
Parameters router-instance — Specify the router name or service ID.
Values router-name: Base, management, vpls-management
service-id: 1 to 2147483647
Default Base
arp
Syntax arp {all | ip-addr | interface {ip-int-name | ip-addr}}
Context clear>router
Description This command clears all or specific ARP entries.
The scope of ARP cache entries cleared depends on the command line option(s) specified.
Parameters all — Clears all ARP cache entries.
ip-addr — Clears the ARP cache entry for the specified IP address.