Filter Configuration Command Reference
516 Router Configuration Guide
— description description-string
—no description
— log log-id
—no log
— match [frame-type {802dot3 | 802dot2-llc | 802dot2-snap | ethernet_II}]
—no match
— dot1p dot1p-value [dot1p-mask]
—no dot1p
— dsap dsap-value [dsap-mask]
—no dsap
— dst-mac ieee-address [ieee-address-mask]
—no dst-mac
— etype 0x0600..0xffff
—no etype
— inner-tag value [vid-mask]
—no inner-tag
— isid value [to higher-value]
—no isid
— outer-tag value [vid-mask]
—no outer-tag
— snap-oui {zero | non-zero}
—no
snap-oui
— snap-pid snap-pid
—no snap-pid
— ssap ssap-value [ssap-mask]
—no ssap
— src-mac ieee-address [ieee-address-mask]
—no src-mac
— pbr-down-action-override {drop | forward | filter-default-action}
—no pbr-down-action-override
— sticky-dest hold-time-up
— sticky-dest no-hold-time-up
—no sticky-dest
— filter-name filter-name
—no filter-name
— renum old-entry-id new-entry-id
— scope {exclusive | template}
—no scope
— type filter-type
Match Filter List Commands
config
—filter
— match-list
— ip-prefix-list ip-prefix-list-name [create]
—no ip-prefix-list ip-prefix-list-name
— [no] apply-path
— bgp-peers index group reg-exp neighbor reg-exp
—no bgp-peers index
— description description-string
To Next Page