IP Router Configuration
Router Configuration Guide 357
Context clear>router
Description This command clears IPv6 neighbor information and only applies to the 7750 SR and 7950 XRS.
Parameters all — Clears IPv6 neighbors.
ip-int-name — Clears the specified neighbor interface information.
Values 32 characters maximum
ip-address — Clears the specified IPv6 neighbors.
Values
router-advertisement
Syntax router-advertisement all
router-advertisement [interface interface-name]
Context clear>router
Description This command clears all router advertisement counters.
Parameters all — Clears all router advertisement counters for all interfaces.
interface interface-name — Clear router advertisement counters for the specified interface.
Debug Commands
destination
Syntax destination trace-destination
Context debug>trace
Description This command specifies the destination to send trace messages.
Parameters trace-destination — The destination to send trace messages.
Values stdout, console, logger, memory
ipv6-address: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
To Next Page
Loading...
