Show, Clear, and Debug Command Reference
358 Router Configuration Guide
enable
Syntax [no] enable
Context debug>trace
Description This command enables the trace.
The no form of the command disables the trace.
trace-point
Syntax [no] trace-point [module module-name] [type event-type] [class event-class] [task task-
name] [function function-name]
Context debug>trace
Description This command adds trace points.
The no form of the command removes the trace points.
router
Syntax router router-instance
Context debug
Description This command configures debugging for a router instance.
Parameters router-instance — Specify the router name or service ID.
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
ip
Syntax ip
Context debug>router
Description This command configures debugging for IP.
To Next Page
Loading...
