Alcatel-Lucent 7450 - Page 359

IP Router Configuration
Router Configuration Guide 359
arp
Syntax arp
Context debug>router>ip
Description This command configures route table debugging.
icmp
Syntax [no] icmp
Context debug>router>ip
Description This command enables ICMP debugging.
icmp6
Syntax icmp6 [ip-int-name]
no icmp6
Context debug>router>ip
Description This command enables ICMPv6 debugging.
interface
Syntax [no] interface [ip-int-name | ip-address | ipv6-address | ipv6-address]
Context debug>router>ip
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
Values The following values apply to the 7750 SR and 7950 XRS:
Values The following values apply to the 7450 ESS:
ipv4-address: a.b.c.d (host bits must be 0)
ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D