Alcatel-Lucent 7450 - Configuring a Network Interface

IP Router Configuration
Router Configuration Guide 67
interface interface-name
address {ip-address/mask | ip-address
[netmask]} [broadcast {all-ones | host-ones]
secondary {[address/mask | ip-address]
[netmask]} [broadcast {all-ones | host-
ones}] [igp-inhibit]
Configuring a Network Interface
To configure a network interface for the 7450 ESS:
CLI Syntax: config>router
interface interface-name
address ip-addr{/mask-length | mask}
[broadcast {all-ones | host-ones}]
cflowd {acl | interface}
egress
filter ip ip-filter-id
ingress
filter ip ip-filter-id
port port-name
To configure a network interface for the 7750 SR:
CLI Syntax: config>router
interface interface-name
address ip-addr{/mask-length | mask}
[broadcast {all-ones | host-ones}]
cflowd {acl | interface}
egress
filter ip ip-filter-id
filter ipv6 ipv6-filter-id
ingress
filter ip ip-filter-id
filter ipv6 ipv6-filter-id
port port-name
To configure a network interface on the 7950 XRS:
CLI Syntax: config>router
interface interface-name
address ip-addr{/mask-length | mask}
[broadcast {all-ones | host-ones}]
egress
filter ip ip-filter-id
filter ipv6 ipv6-filter-id