Show, Clear, Monitor, and Debug Command Reference
642 Router Configuration Guide
ip-prefix-list
Syntax ip-prefix-list [prefix-list-name]
ip-prefix-list prefix-list-name references
Context show>filter>match-list
Description This command displays IPv4 prefixes information for match criteria in IPv4 ACL and CPM filter
policies.
Parameters prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
ipv6-prefix-list
Syntax ipv6-prefix-list [prefix-list-name]
ipv6-prefix-list prefix-list-name references
Context show>filter>match-list
Description This command displays IPv6 prefixes information for match criteria in IPv6 ACL and CPM filter
policies. This command only applies to the 7750 SR.
Parameters prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
port-list
Syntax port-list [port-list-name]
port-list port-list-name references
Context show>filter>match-list
Description This command displays TCP/UDP/SCTP port values or ranges for match criteria in IPv4 and IPv6
ACL and CPM filter policies.
Parameters port-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
Clear Commands
ip
Syntax ip filter-id [entry entry-id] [ingress | egress]
To Next Page
Loading...
