Filter Policies
Router Configuration Guide 643
Context clear>filter
Description Clears the counters associated with the entries of the specified IPv4 filter policy.
By default, the counters associated with each entry of the specified filter policy are all cleared. The
scope of which counters are cleared can be narrowed using the command line parameters.
Default Clears all counters associated with each entry of the specified IPv4 filter policy.
Parameters filter-id — The IPv4 filter policy ID for which to clear the entry counters. Values can be expressed
in different formats. The following shows decimal integer format.
Values 1 to 65535
entry entry-id — Specifies that only the counters associated with the specified filter policy entry
will be cleared.
Values 1 to 65535
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
ipv6
Syntax ipv6 ipv6-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description Clears the counters associated with the entries of the specified IPv6 filter policy.
By default, the counters associated with each entry of the specified filter policy are all cleared. The
scope of which counters are cleared can be narrowed using the command line parameters.
Default Clears all counters associated with each entry of the specified IPv6 filter policy.
Parameters ipv6-filter-id — The IPv6 filter policy ID for which to clear the entry counters. Values can be
expressed in different formats. The following only shows decimal integer format.
Values 1 to 65535
entry entry-id — Specifies that only the counters associated with the specified filter policy entry
will be cleared.
Values 1 to 65535
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
log
Syntax log log-id
To Next Page
Loading...
