Common Configuration Tasks
76 Router Configuration Guide
description "Entry From Protocol ospf3 To bgp"
from
protocol ospf3
exit
to
protocol bgp
exit
action accept
exit
exit
exit
exit
----------------------------------------------
A:ALA-49>configure>router#
Router Advertisement
To configure the router to originate router advertisement messages on an interface, the
interface must be configured under the router-advertisement context and be enabled (no
shutdown). All other router advertisement configuration parameters are optional.
Router advertisement can be configured under the config>router>router-advertisement
context or under the config>service>vprn>router-advertisement context. Use the
following examples of CLI syntax to enable router advertisement and configure router
advertisement parameters.
To configure router advertisement on the 7750 SR:
CLI Syntax: config>router# router-advertisement
dns-options
dns-servers ipv6-address
rdnss-lifetime seconds
interface ip-int-name
current-hop-limit number
dns-options
dns-servers ipv6-address
rdnss-lifetime {seconds | infinite}
include-dns
managed-configuration
max-advertisement-interval seconds
min-advertisement-interval seconds
mtu mtu-bytes
other-stateful-configuration
prefix ipv6-prefix/prefix-length
autonomous
on-link
preferred-lifetime {seconds | infinite}
valid-lifetime {seconds | infinite}
reachable-time milliseconds
To Next Page
Loading...
