Show, Clear, and Debug Command Reference
356 Router Configuration Guide
Description This command clears L2PT data and only applies to the 7750 SR and 7950 XRS.
Parameters tunnel-group-name — Specifies a Layer Two Tunneling Protocol Tunnel Group name.
tunnel
Syntax tunnel tunnel-id
Context clear>router>l2tp
Description This command clears L2PT data and only applies to the 7750 SR and 7950 XRS.
Parameters tunnel-group-name — Clears L2TP tunnel statistics.
statistics
Syntax statistics
Context clear>router>l2tp
clear>router>l2tp>group
clear>router>l2tp> tunnel
Description This command clears statistics for the specified context and only applies to the 7750 SR and
7950 XRS.
statistics
Syntax statistics [ip-address | ip-int-name]
Context clear>router>dhcp
clear>router>dhcp6
Description This command clear statistics for DHCP and DHCP6and DHCP6 relay and snooping statistics.
If no IP address or interface name is specified, then statistics are cleared for all configured interfaces.
If an IP address or interface name is specified, then only data regarding the specified interface is
cleared.
Parameters ip-address | ip-int-name — Displays statistics for the specified IP interface.
neighbor
Syntax neighbor {all | ip-address}
neighbor [interface ip-int-name | ip-address]
To Next Page
Loading...
