IP Router Configuration
Router Configuration Guide 355
icmp6
Syntax icmp6 all
icmp6 global
icmp6 interface interface-name
Context clear>router
Description This command clears ICMPv6 statistics.
Parameters all — Clears all statistics.
global — Clears global router statistics.
interface-name — Clears ICMPv6 statistics for the specified interface.
interface
Syntax interface [ip-int-name | ip-addr] [icmp] [urpf-stats] [statistics]
Context clear>router
Description This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters ip-int-name | ip-addr — The IP interface name or IP interface address.
Default All IP interfaces.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limiting.
urpf-stats — Resets the statistics associated with uRPF failures.
statistics — Resets the IP interface traffic statistics.
l2tp
Syntax l2pt
Context clear>router
Description This command enables the context to clear L2PT data and only applies to the 7750 SR and 7950 XRS.
group
Syntax group tunnel-group-name
Context clear>router>l2tp
To Next Page
Loading...
