Show, Clear, and Debug Command Reference
354 Router Configuration Guide
dhcp6
Syntax dhcp6
Context clear>router
Description This command enables the context to clear DHCP6 related information.
forwarding-table
Syntax forwarding-table [slot-number]
Context clear>router
Description This command clears entries in the forwarding table (maintained by the IOMs).
If the slot number is not specified, the command forces the route table to be recalculated.
Parameters slot-number — Clears the specified card slot.
Default all IOMs or linecards
Values 1 to 10
grt-lookup
Syntax grt-lookup
Context clear>router
Description This command re-evaluates route policies for GRT and only applies to the 7750 SR.
icmp-redirect-route
Syntax icmp-redirect-route {all | ip-address}
Context clear>router
Description This command deletes routes created as a result of ICMP redirects received on the management
interface.
Parameters all — Clears all routes.
ip-address — Clears the routes associated with the specified IP address.
To Next Page
Loading...
