IP Router Configuration Command Reference
114 Router Configuration Guide
Default no refresh-time
Parameters seconds1 — Specifies a time in seconds.
Values 30 to 32767
seconds2 — Specifies a time in seconds.
Values 60 to 65535
shutdown
Syntax shutdown
no shutdown
Context config>router>origin-validation>rpki-session
Description This command administratively disables an RPKI-Router session. The no form of the command
enables the RPKI-Router session.
Default no shutdown
stale-time
Syntax stale-time seconds
no stale-time
Context config>router>origin-validation>rpki-session
Description This command configures the maximum length of time that prefix origin validation records learned
from the cache server remain usable after the RPKI-Router session goes down. The default stale-time
is 3600 seconds (1 hour). When the timer expires all remaining stale entries associated with the session
are deleted.
Default no stale-time
Parameters seconds — Specifies a time in seconds.
Values 60 to 3600
static-entry
Syntax static-entry ip-prefix/ip-prefix-length upto prefix-length2 origin-as as-number [valid |
invalid]
no static-entry ip-prefix/ip-prefix-length upto prefix-length2 origin-as as-number
Context config>router>origin-validation
To Next Page
Loading...
