Filter Policies
Router Configuration Guide 617
Egress counters count the packets without Layer 2 encapsulation. Ingress counters count the packets
with Layer 2 encapsulation.
Sample Output
*A:ALA-48# show filter ipv6 100 counters
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 100 Applied : No
Scope : Template Def. Action : Forward
Entries : 1
Description : IPv6 filter configuration
-------------------------------------------------------------------------------
Filter Match Criteria : IPv6
-------------------------------------------------------------------------------
Entry : 10
Ing. Matches : 9788619 pkts (978861900 bytes)
Egr. Matches : 9788619 pkts (978861900 bytes)
===============================================================================
*A:ALA-48#
ipv6
Syntax ipv6 [filter-type filter-type]
ipv6 embedded [inactive]
ipv6 ipv6-filter-id embedded [inactive]
ipv6 ipv6-filter-id [detail]
ipv6 ipv6-filter-id associations
ipv6 ipv6-filter-id type entry-type
ipv6 ipv6-filter-id counters [type entry-type] [detail]
ipv6 ipv6-filter-id entry entry-id [counters] [detail]
Context show>filter
Description This command shows IPv6 filter information.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Ing. Matches The number of ingress filter matches/hits for the filter entry.
Egr. Matches The number of egress filter matches/hits for the filter entry.
Table 53: Filter IP Counters Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
