Show, Clear, Monitor, and Debug Command Reference
632 Router Configuration Guide
mac
Syntax mac mac-filter-id
mac mac-filter-id associations
mac mac-filter-id associations [type entry-type] counters [detail]
mac [mac-filter-id ] embedded [inactive]
mac mac-filter-id entry entry-id [counters] [detail]
mac [filter-type filter-type ]
mac mac-filter-id type entry-type ]
Context show>filter
Description This command displays MAC filter information and only applies to the 7750 SR and 7450 ESS.
Parameters mac-filter-id — Displays detailed information for the specified filter ID and its filter entries.
Values 1 to 65535
associations — Appends information as to where the filter policy ID is applied to the detailed
filter policy ID output.
counters — Displays counter information for the specified filter ID.
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID
only.
Values 1 to 65535
type entry-type — Specify the type of filter entries as “fixed” or “embedded”.
filter-type filter-type — Specify the type of filter entries as “config” or “vsd”.
Output No Parameters Specified — When no parameters are specified, a brief listing of MAC filters is
produced. The following table describes the command output for the command.
Table 60: Filter MAC Output Field Descriptions
Label Description
Filter Id The MAC filter ID
Scope Template
The filter policy is of type Template.
Exclusive
The filter policy is of type Exclusive.
Applied No
The filter policy ID has not been applied.
Yes
The filter policy ID is applied.
Description The MAC filter policy description.
To Next Page
Loading...
