Filter Policies
Router Configuration Guide 633
Filter ID Specified — When the filter ID is specified, detailed filter information for the filter ID and
its entries is produced. The following table describes the command output for the command.
Table 61: Filter MAC with Filter-ID Specified Output Field Descriptions
Label Description
MAC Filter
Filter Id
The MAC filter policy ID.
Scope Template
The filter policy is of type Template.
Exclusive
The filter policy is of type Exclusive.
Description The MAC filter policy description.
Applied No
The filter policy ID has not been applied.
Yes
The filter policy ID is applied.
Def. Action Forward
The default action for the filter ID for packets that do not match the filter
entries is to forward.
Drop
The default action for the filter ID for packets that do not match the filter
entries is to drop.
Filter Match
Criteria
MAC
Indicates the filter is an MAC filter policy.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Description The filter entry description.
FrameType Ethernet
The entry ID match frame type is Ethernet IEEE 802.3.
Ethernet II
The entry ID match frame type is Ethernet Type II.
Src MAC The source MAC address and mask match criterion. When both the MAC
address and mask are all zeros, no criterion specified for the filter entry.
To Next Page
Loading...
