Show, Clear, Monitor, and Debug Command Reference
628 Router Configuration Guide
A:ALA-48# show filter ipv6 8 counters
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 8 Applied : Yes
Scope : Template Def. Action : Forward
Entries : 4
Description : Description for Ipv6 Filter Policy id # 8
-------------------------------------------------------------------------------
Filter Match Criteria : IPv6
-------------------------------------------------------------------------------
Entry : 5
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Entry : 6
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Entry : 8
Ing. Matches : 160 pkts (14400 bytes)
Egr. Matches : 80 pkts (6880 bytes)
Entry : 10
Ing. Matches : 80 pkts (7200 bytes)
Egr. Matches : 80 pkts (6880 bytes)
====================================================================================
A:ALA-48#
log
Syntax log log-id [match string]
log [bindings]
Context show>filter
Description This command shows the contents of a memory-based or a file-based filter log.
If the optional keyword match and string parameter are given, the command displays the given filter
log from the first occurrence of the given string.
Parameters log-id — The filter log ID destination expressed as a decimal integer.
Values 101 to 199
match string — Specifies to start displaying the filter log entries from the first occurrence of
string.
bindings — Displays the number of filter logs currently instantiated.
Output Log Message Formatting — Each filter log entry contains the following information in case summary
log feature is not active (as appropriate).
To Next Page
Loading...
