Filter Policies
Router Configuration Guide 627
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
A:ALA-48#
Show Filter Counters — The following table describes the output fields when the counters keyword
is specified.
Egress count the packets without Layer 2 encapsulation. Ingress counters count the packets with Layer
2 encapsulation.
Sample Output
Table 57: Filter IPv6 Counters Output Field Descriptions
Label Description
IP Filter
Filter Id
The IP filter policy ID.
Scope Template
The filter policy is of type template.
Exclusive
The filter policy is of type exclusive.
Applied No
The filter policy ID has not been applied.
Yes
The filter policy ID is applied.
Def. Action Forward
The default action for the filter ID for packets that do not match the
filter entries is to forward.
Drop
The default action for the filter ID for packets that do not match the
filter entries is to drop.
Filter Match Criteria IP
Indicates the filter is an IP filter policy.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Ing. Matches The number of ingress filter matches/hits for the filter entry.
Egr. Matches The number of egress filter matches/hits for the filter entry.
To Next Page
Loading...
