OpenFlow Command Reference
680 Router Configuration Guide
Default no aux-channel-enable
controller
Syntax [no] controller ip-address:port
Context config>open-flow>of-switch
Description This command configures the OpenFlow controller for this OpenFlow switch. Up to two controllers
can be configured per OpenFlow switch instance.
The no form of this command deletes the controller for this OpenFlow switch instance.
Default no controller
Parameters ip-address:port — Specifies the IP address and TCP port for the OpenFlow channel to the the
controller.
description
Syntax description string
no description
Context config>open-flow>of-switch
Description This command allows the user to configure a description string for the specified OpenFlow controller
instance.
The no form of this command deletes the description of the specified OpenFlow controller instance.
Default no controller
Parameters string — Specifies a description of the OpenFlow switch instance, a string up to 256 characters.
echo-interval
Syntax echo-interval seconds
no echo-interval
Context config>open-flow>of-switch
Description This command configures the Echo Request interval for monitoring the OpenFlow control channels to
the controller(s) for this OpenFlow switch instance.
The no form of this command restores default value.
Default 10
To Next Page
Loading...
