Hybrid OpenFlow Switch
Router Configuration Guide 681
Parameters seconds — Specifies an interval, in seconds.
Values 1 to 3600
echo-multiple
Syntax echo-multiple value
no echo-multiple
Context config>open-flow>of-switch
Description This command configures the number of consecutive Echo Reply messages that must be lost to declare
OF control channel down.
The no form of this command restores default value.
Default 3
Parameters value — Specifies the threshold value for the number of consecutive Echo Rely messages lost.
Values 3 to 100
logical-port-status
Syntax [no] logical-port-status [rsvp-te | mpls-tp]
Context config>open-flow>of-switch
Description This command enables status change reporting to the OpenFlow controller for the specified logical
port type. To report on multiple logical port types, the command needs to be executed multiple times
with different logical port specified as required.
The no form of this command disables status reporting for specified or all (no argument) logical ports.
Default no logical-port-status
Parameters rsvp-te — Enables reporting on RSVP-TE LSP logical ports.
mpls-te — Enables reporting on MPLS-TE logical ports.
shutdown
Syntax [no] shutdown
Context config>open-flow>of-switch
Description This command administratively enables or disables the OpenFlow switch instance. Disabling the
switch purges all flowtable entries.
To Next Page
Loading...
