IP Router Configuration
Router Configuration Guide 155
no authentication-policy
Context config>router>l2tp>group>ppp
Description This command configures the authentication policy.
Parameters auth-policy-name — Specifies the authentication policy name.
Values 32 chars max
default-group-interface
Syntax default-group-interface ip-int-name service-id service-id
no default-group-interface
Context config>router>l2tp>group>ppp
Description This command configures the default group interface.
Parameters ip-int-name — Specifies the interface name.
Values 32 chars max
service-id — Specifies the service ID.
Values 1 to 2147483648
svc-name — Specifies the service name (instead of service ID).
Values 64 chars max
keepalive
Syntax keepalive seconds [hold-up-multiplier multiplier]
no keepalive
Context config>router>l2tp>group>ppp
Description This command configures the PPP keepalive interval and multiplier.
Parameters seconds — Specifies in seconds the interval.
Values 10 to 300
multiplier — Specifies the multiplier.
Values 1 to 5
mtu
Syntax mtu mtu-bytes
To Next Page
Loading...
