IP Router Configuration Command Reference
158 Router Configuration Guide
Parameters tunnel-name — Specifies a valid string to identify a L2TP up to 32 characters in length.
create — mandatory while creating a new tunnel
auto-establish
Syntax [no] auto-establish
Context config>router>l2tp>group>tunnel
Description This command specifies if this tunnel is to be automatically set up by the system.
no auto-establish
avp-hiding
Syntax avp-hiding {never | sensitive | always}
no avp-hiding
Context config>router>l2tp>group>tunnel
Description This command configures Attribute Value Pair (AVP) hiding. This capability can be used to avoid the
passing of sensitive data, such as user passwords, as cleartext in an AVP.
It is recommended that sensitive information not be sent in clear text.
The no form of the command removes the parameter of the configuration and indicates that the value
on group level will be taken.
Default no avp-hiding
Parameters avp-hiding — Specifies the method to be used for the authentication of the tunnel.
Values never — AVP hiding is not used.
sensitive — AVP hiding is used only for sensitive information
(such as username/password).
always — AVP hiding is always used.
challenge
Syntax challenge challenge-mode
no challenge
Context config>router>l2tp>group>tunnel
Description This command configures the use of challenge-response authentication.
To Next Page
Loading...
