IP Router Configuration
Router Configuration Guide 171
type — Specifies whether the traffic sampling is based on an acl match, or all traffic entering or
exiting the associated interface.
Values acl — Specifies that the sampled traffic is controlled via an IP
traffic filter entry with the action “filter-sample” configured.
interface — Specifies that all traffic entering or exiting the
interface is subject to sampling.
direction — Specifies the direction to collect traffic flow samples.
Values ingress-only — Enables ingress sampling only on the associated
interface.
egress-only — Enables egress sampling only on the associated
interface.
both — Enables both ingress and egress cflowd sampling.
cpu-protection
Syntax cpu-protection policy-id
no cpu-protection
Context config>router>interface
Description This command assigns an existing CPU protection policy for the interface. The CPU protection
policies are configured in the config>sys>security>cpu-protection>policy cpu-protection-policy-id
context.
Parameters policy-id — Specifies an existing CPU protection policy.
Values 1 to 255
dist-cpu-protection
Syntax dist-cpu-protection policy-name
no dist-cpu-protection
Context config>router>if
Description This command assigns a Distributed CPU protection policy for the interface.
enable-ingress-stats
Syntax [no] enable-ingress-stats
Context config>router>interface
config>service>ies >interface
config>service>vprn>interface
config>service>ies>sub-if>grp-if
To Next Page
Loading...
