IP Router Configuration Command Reference
186 Router Configuration Guide
egress-port-redirect-group queue-group-name — This optional parameter specifies the egress
queue-group used for all egress forwarding-class redirections specified within the network
QoS policy ID. The specified queue-group-name must exist as an egress queue group applied
to the egress context of the port associated with the IP interface.
egress-instance instance-id — Since multiple instances of the same egress queue-group can be
applied to the same port this optional parameter is used to specify which particular instance
to associate with this particular network IP interface.
Values 1 to 16384
ingress-fp- redirect-group queue-group-name — This optional parameter specifies the ingress
queue-group used for all ingress forwarding-class redirections specified within the network
QoS policy ID. The specified queue-group-name must exist as an ingress queue group applied
to the ingress context of the forwarding plane associated with the IP interface.
ingress-instance instance-id — Since multiple instances of the same ingress queue-group can be
applied to the same forwarding plane this parameter is required to specify which particular
instance to associate with this particular network IP interface.
Values 1 to 16384
remote-proxy-arp
Syntax [no] remote-proxy-arp
Context config>router>interface
Description This command enables remote proxy ARP on the interface.
Default no remote-proxy-arp
secondary
Syntax secondary {[ip-address/mask | ip-address netmask]} [broadcast {all-ones | host-ones}]
[igp-inhibit]
no secondary ip-addr
Context config>router>interface
Description Use this command to assign up to 16 secondary IP addresses to the interface. Each address can be
configured in an IP address, IP subnet or broadcast address format.
Parameters ip-address — The IP address of the IP interface. The ip-address portion of the address command
specifies the IP host address that will be used by the IP interface within the subnet. This
address must be unique within the subnet and specified in dotted decimal notation.
Values 1.0.0.0 to 223.255.255.255
To Next Page
Loading...
