IP Router Configuration
Router Configuration Guide 197
mask — The subnet mask in dotted decimal notation. When the IP prefix is not specified in CIDR
notation, a space separates the ip-addr from a traditional dotted decimal mask. The mask
parameters indicates the complete mask that will be used in a logical ‘AND’ function to
derive the local subnet of the IP address. A mask of 255.255.255.255 is reserved for system
IP addresses.
Values 128.0.0.0 to 255.255.255.255
netmask — The subnet mask in dotted decimal notation.
Values 0.0.0.0 to 255.255.255.255 (network bits all 1 and host bits all 0).
description
Syntax description description-string
no description
Context config>router>mh-primary-interface
config>router>mh-secondary-interface
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context.
Default no description
Parameters description-string — The description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
character (#, $, space, etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>router>mh-primary-interface
config>router>mh-secondary-interface
Description The shutdown command administratively disables an entity. The operational state of the entity is
disabled as well as the operational state of any entities contained within. Many objects must be shut
down before they may be deleted.
Unlike other commands and parameters where the default state is not indicated in the configuration
file, shutdown and no shutdown are always indicated in system generated configuration files.
The no form of the command puts an entity into the administratively enabled state.
Default no shutdown
To Next Page
Loading...
