Alcatel-Lucent 7450 - Page 250

Show, Clear, and Debug Command Reference
250 Router Configuration Guide
sap:1/2/12:1 0/8000 Up Up
interfaceService No 0/0 Down Down
sap:1/2/1 0/8000 Down Down
interfaceServiceNonDefault No 0/0 Up NoServerCo*
sap:1/2/12:2 0/8000 Down Down
ip-61.4.113.4 Yes 575/8000 Up Up
sap:1/1/1:1 580/8000 Up Up
=============================================================================
A:ALA-1#
ecmp
Syntax ecmp
Context show>router
Description This command displays the ECMP settings for the router.
Output ECMP Settings Output — The following table describes the output fields for the router ECMP
settings.
Sample Output
A:ALA-A# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Configured-ECMP-Routes
-------------------------------------------------------------------------------
1 Base True 8
===============================================================================
A:ALA-A#
*A:Dut-C# show router ecmp
===============================================================================
Router ECMP
Table 13: ECMP Field Descriptions
Label Description
Instance The router instance number.
Router Name The name of the router instance.
ECMP False
ECMP is disabled for the instance.
True
ECMP is enabled for the instance.
Configured-ECMP-Routes The number of ECMP routes configured for path sharing.