Alcatel-Lucent 7450 - Page 260

Show, Clear, and Debug Command Reference
260 Router Configuration Guide
Sample Output
A:SR-3>show>router>auth# show router icmp6
===============================================================================
Global ICMPv6 Stats
===============================================================================
Received
Total : 14 Errors : 0
Destination Unreachable : 5 Redirects : 5
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 4
Neighbor Solicits : 0 Neighbor Advertisements : 0
-------------------------------------------------------------------------------
Sent
Total : 10 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 5 Neighbor Advertisements : 5
===============================================================================
A:SR-3>show>router>auth#
if-attribute
Syntax if-attribute
Context show>router
Description This command enables the context to display interface attribute related information.
srlg-group
Syntax srlg-group [name]
Context show>router>if-attribute>srlg-group
Description This command displays SRLG statistics.
Parameters name — Only displays entries associated with the specified SRLG name.
Output SRLG Output — The following table describes the show router if-attribute srlg-group output fields:
Router Advertisements The number of times the router advertised its location.
Neighbor
Advertisements
The number of times the neighbor router advertised its location.
Table 14: ICMP6 Field Descriptions (Continued)
Label Description