IP Router Configuration
Router Configuration Guide 269
If Index The interface index of the IP router interface.
Virt If Index The virtual interface index of the IP router interface.
Last Oper Change The last change in operational status.
Global If Index The global interface index of the IP router interface.
Sap ID The SAP identifier.
TOS Marker The TOS byte value in the logged packet.
If Type Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
SNTP B.cast Displays if the broadcast-client global parameter is configured.
IES ID The IES identifier.
QoS Policy The QoS policy ID associated with the IP interface.
MAC Address The MAC address of the interface.
Arp Timeout The ARP timeout for the interface, in seconds, which is the time an ARP
entry is maintained in the ARP cache without being refreshed.
ICMP Mask Reply False — The IP interface will not reply to a received ICMP mask
request.
True — The IP interface will reply to a received ICMP mask request.
Arp Populate Displays whether ARP is enabled or disabled.
Host Conn Verify The host connectivity verification.
LdpSyncTimer Specifies the IGP/LDP sync timer value.
uRPF Chk Specifies whether unicast RPF (uRPF) Check is enabled on this
interface.
uRPF Iv6 Chk Specifies whether unicast RPF (uRPF) Check IPv6 is enabled on this
interface.
PTP HW Assist Specifies whether the PTP Hardware Assist function is enabled on this
interface.
Cflowd Specifies the type of Cflowd analysis that is applied to the interface.
acl — ACL Cflowd analysis is applied to the interface.
interface — Interface Cflowd analysis is applied to the interface.
none — No Cflowd analysis is applied to the interface.
Table 18: Detailed IP Interface Field Descriptions (Continued)
Label Description
To Next Page
Loading...
