Alcatel-Lucent 7450 - Page 276

Show, Clear, and Debug Command Reference
276 Router Configuration Guide
Summary IP Interface Output — The following table describes the summary output fields for the
router IP interfaces.
Sample Output
A:ALA-A# show router interface summary
===============================================================================
Router Summary (Interfaces)
===============================================================================
Instance Router Name Interfaces Admin-Up Oper-Up
-------------------------------------------------------------------------------
1 Base 7 7 5
===============================================================================
Detailed IPv6 Interface Output — The following is an example of the IPv6 interface detailed output.
Sample Output
*A:ALA-A# show router interface ipv6 detail
===============================================================================
Interface Table (Router: Base)
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : gig-1/1/1
Admin State : Up Oper (v4/v6) : Up/Up
Protocols : None
IPv6 Addr : fe80::da24:ffff:fe00:0/64 PREFERRED
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : (Not Specified)
If Index : 2 Virt. If Index : 2
Last Oper Chg : 05/12/2014 15:22:37 Global If Index : 1
Lag Link Map Prof: none
Port Id : 1/1/1:0
Table 20: Summary IP Interface Field Descriptions
Label Description
Instance The router instance number.
Router Name The name of the router instance.
Interfaces The number of IP interfaces in the router instance.
Admin-Up The number of administratively enabled IP interfaces in the router
instance.
Oper-Up The number of operationally enabled IP interfaces in the router
instance.