Show, Clear, and Debug Command Reference
286 Router Configuration Guide
admin status : Up three-way-hello : N/A
hello-interval : N/A hello-multiplier : 35 * 0.1
tracking support : Disabled Improved Assert : N/A
spmsi : pim-ssm 225.0.0.0/32
join-tlv-packing : N/A
data-delay-interval: 3 seconds
data-threshold : 224.0.0.0/4 --> 1 kbps
===============================================================================
neighbor
Syntax neighbor [ip-int-name | ip-address | mac ieee-mac-address | summary]
Context show>router
Description This command displays information about the IPv6 neighbor cache.
Parameters ip-int-name — Specify the IP interface name.
ip-address — Specify the address of the IPv6 interface address.
mac ieee-mac-address — Specify the MAC address.
summary — Displays summary neighbor information.
Output Neighbor Output — The following table describes neighbor output fields.
Sample Output
B:CORE2# show router neighbor
Table 21: Neighbor Field Descriptions
Label Description
IPv6 Address Displays the IPv6 address.
Interface Displays the name of the IPv6 interface name.
MAC Address Specifies the link-layer address.
State Displays the current administrative state.
Exp Displays the number of seconds until the entry expires.
Type Displays the type of IPv6 interface.
Interface Displays the interface name.
Rtr Specifies whether a neighbor is a router.
Mtu Displays the MTU size.
To Next Page
Loading...
