Show, Clear, and Debug Command Reference
300 Router Configuration Guide
Dest-Class : 0
Metric : 1
ECMP-Weight : 2
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
rtr-advertisement
Syntax rtr-advertisement [interface interface-name] [prefix ipv6-prefix[/prefix-length]]
rtr-advertisement [conflicts]
Context show>router
Description This command displays router advertisement information.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters interface-name — Maximum 32 characters.
ipv6-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length
and only applies to the 7750 SR and 7950 XRS.
Values
Output Router-Advertisement Table Output — The following table describes the output fields for router-
advertisement.
ipv6 ipv6-prefix[/pref*: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
prefix-length: 1 to 128
Table 24: Router Advertisement Table Field Descriptions
Label Description
Rtr Advertisement Tx/
Last Sent
The number of router advertisements sent and time since they were sent.
Nbr Solicitation Tx The number of neighbor solicitations sent and time since they were sent.
Nbr Advertisement Tx The number of neighbor advertisements sent and time since they were
sent.
Rtr Advertisement Rx The number of router advertisements received and time since they were
received.
To Next Page
Loading...
