VRRP
Router Configuration Guide 431
The actual effect on the virtual router instance in-use priority value depends on the defined event
priority and its delta or explicit nature.
The no form of the command deletes the specific port or channel monitoring event. The event may be
removed at anytime. When the event is removed, the in-use priority of all associated virtual router
instances will be re-evaluated. The events hold-set timer has no effect on the removal procedure.
Default no port-down — No port down priority control events are defined.
Parameters port-id — The port ID of the port monitored by the VRRP priority control event.
The port-id can only be monitored by a single event in this policy. The port can be monitored
by multiple VRRP priority control policies. A port and a specific channel on the port are
considered to be separate entities. A port and a channel on the port can be monitored by
separate events in the same policy.
Values The following values apply to the 7750 SR:
Values The following values apply to the 7450 ESS:
port-id slot/mda/port[.channel]
eth-sat-id esat-id/slot/port
esat keyword
id 1 to 20
pxc-id pxc-id.sub-port
pxc keyword
id 1 to 64
sub-port a, b
aps-id aps-group-id[.channel]
aps keyword
group-id 1 to 64
bundle-type-slot/mda.<bundle-num>
bundle keyword
type ima, ppp
bundle-num 1 to 256
ccag-id ccag-id. path-id[cc-type]
ccag keyword
id 1 to 8
path-id a, b
cc-type .sap-net, .net-sap
port-id slot/mda/port[.channel]
eth-sat-id esat-id/slot/port
esat keyword
id 1 to 20
To Next Page
Loading...
