Alcatel-Lucent 7450 - Page 456

Show, Monitor, Clear, and Debug Command Reference
456 Router Configuration Guide
Sample Output
A:ALA-A# show vrrp policy
===============================================================================
VRRP Policies
===============================================================================
Policy Current Current Current Delta Applied
Id Priority & Effect Explicit Delta Sum Limit
-------------------------------------------------------------------------------
1 None None None 1 Yes
2 None None None 1 No
===============================================================================
A:ALA-A#
A:ALA-A# show vrrp policy 1
===============================================================================
VRRP Policy 1
===============================================================================
Description : 10.10.200.253 reachability
Current Priority: None Applied : No
Current Explicit: None Current Delta Sum : None
Delta Limit : 1
-------------------------------------------------------------------------------
Applied To VR Opr Base In-use Master Is
Interface Name Id Pri Pri Pri Master
-------------------------------------------------------------------------------
None
-------------------------------------------------------------------------------
Priority Control Events
-------------------------------------------------------------------------------
Event Type & ID Event Oper State Hold Set Priority In
Remaining &Effect Use
-------------------------------------------------------------------------------
Host Unreach 10.10.200.252 n/a Expired 20 Del No
Host Unreach 10.10.200.253 n/a Expired 10 Del No
Route Unknown 10.10.100.0/24 n/a Expired 1 Exp No
===============================================================================
A:ALA-A#
VRRP Policy Event Output — The following table describes a specific event VRRP policy command
output fields.
Table 41: VRRP Policy Event Output Fields Descriptions
Label Description
Description A text string which describes the VRRP policy.
Policy Id The VRRP priority control policy associated with the VRRP virtual
router instance.
A value of 0 indicates that no control policy is associated with the
virtual router instance.