EasyManua.ls Logo

Alcatel-Lucent 7450 - Page 548

Alcatel-Lucent 7450
778 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Filter Configuration Command Reference
548 Router Configuration Guide
The no form of the command removes the DSCP match criterion.
Default no dscp
Parameters dscp-name — Configures a DSCP name. The DiffServ code point may only be specified by its
name.
Values be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4,
cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32, af33,
af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23, cp25,
cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44,
cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58,
cp59, cp60, cp61, cp62, cp63
dst-ip
Syntax dst-ip {ip-address/mask | ip-address ipv4-address-mask | ip-prefix-list prefix-list-name]}
dst-ip {ipv6-address/prefix-length | ipv6-address ipv6-address-mask | ipv6-prefix-list prefix-
list-name}
no dst-ip
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description This command configures a destination address range to be used as a filter policy match criterion.
To match on the IPv4 or IPv6 destination address, specify the address and its associated mask, e.g.,
10.1.0.0/16. The conventional notation of 10.1.0.0 255.255.0.0 can also be used for IPv4.
The no form of this command removes the destination IPv4 or IPv6 address match criterion.
Default no dst-IP
Parameters ip-address — Specifies the destination IPv4 address specified in dotted decimal notation.
Values a.b.c.d
mask — Specifies the length in bits of the subnet mask.
Values 1 to 32
ipv4-address-mask — Specifies the subnet mask in dotted decimal notation.
Values a.b.c.d (dotted quad equivalent of mask length)
ip-prefix-list or ipvv6-prefix-list prefix-list-name — Specifies to use a list of IP prefixes
referred to by prefix-list-name, which is a string of up to 32 characters of printable ASCII
characters. If special characters are used, the string must be enclosed within double quotes.
ip-ipv6-address — The IPv6 prefix for the IP match criterion in hex digits.
Values x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals