Hybrid OpenFlow Switch
Router Configuration Guide 675
• The SR OS Hybrid OpenFlow Switch requires a software upgrade only and can be
enabled on any SR OS router or switch running IOM-2 (with restrictions) or newer
line cards. For full functionality, performance, and future scale IOM3-XP or newer
line cards and CPM4 or newer control cards are recommended.
• Some platforms may not support all OF functionality based on the underlying
hardware. For example, if the underlying hardware does not support IPv6, then OF
IPv6 functionality will not be supported, if the underlying hardware does not support
redirect to LSP, redirect action will be ignored.
• Each flow in an OF flow table must have unique priority. Overlap is not supported
• Timed expiry of the flow entries is not supported
• The implementation is compliant by design with OpenFlow specification as
applicable to supported router functionality only.
To Next Page
Loading...
