Allen-Bradley 20F - Page 13

Rockwell Automation Publication 750-IN001P-EN-P - April 2017 13
Preface
Jumpers PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Drive Power Jumper Configuration on page 215.
Mounting
considerations
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Minimum Clearances on page 36 and Mounting Considerations on page 37.
Environment Industry Installation Guidelines for Pulse-width Modulated (PWM) AC Drives Application Technique, publication
DRIVES-AT003
See this publication for information for different enclosure systems and environmental/location considerations
(to help protect against environmental contaminants), and power and grounding considerations.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Environmental Specifications on page 37
.
Control and signal
cabling
Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 4 – Wire Routing.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See I/O Wiring on page 225
.
Output power cabling Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 1 – Motor Cables.
Output devices Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 6 – Shielded or Armored Power Cable.
1321 Power Conditioning Products Technical Data, publication 1321-TD001
See this publication for load reactors, RWRs, and common mode chokes/cores.
1204 Terminator Instructions, publication 1204-IN002
See this publication for motor terminators.
PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001
See Output Contactor Precaution on page 197
.
Cable length Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 5 – Length Restrictions for Motor Protection.
Encoder Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Chapter 1 – Analog Signal and Encoder Cable.
Motor Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives Installation Instructions,
publication DRIVES-IN001
See Appendix A – Overview.
Topic PowerFlex 750-Series Drives
Esc
Sel
PowerFlex 750-
Series Drive
PowerFlex 520-
Series Drive
(L3)(L2)(L1)GND
PE R S T
WVUGND
PE (T1) (T2) (T3)