EasyManua.ls Logo

Allen-Bradley 20F - COMM Carrier

Allen-Bradley 20F
320 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
284 Rockwell Automation Publication 750-IN001P-EN-P - April 2017
Chapter 5 I/O Wiring
20-COMM Carrier
Enables use of some 20-COMM adapters with PowerFlex 750-Series drives.
See Table 106
.
See publication 750COM-IN001
for instructions on how to install a 20-
COMM adapter on the 20-COMM Carrier.
Table 106 - 20-COMM-x Network Adapter Compatibility with 750-Series Drives
Frame 1 Drives Installation Recommendations
PowerFlex Frame 1 drives require the use of the communication carrier kit,
catalog number 20-750-20COMM-F1. This kit contains the required adapter
plate.
Only install the communication carrier kit in Port 4. See page 252
for port
locations. Port 5 is not accessible when this module is installed.
Frame 2 and Larger Drives Installation Recommendations
We recommend that you install the 20-750-20COMM Communication
Carrier in Port 6. Installing the communication carrier in Port 4 or Port 5
makes the adjacent left port inaccessible to other option modules, and can
interfere with network cable connections.
20-750-20COMM-F1
20-750-20COMM
Frame 1
Frames 2 and Larger
Adapter Accesses Ports 0…6
for I/O Connections
(Implicit and Explicit
Messaging)
Accesses Ports 7
and Higher
(I/O,
Explicit
Messaging)
Supports Drive
Add-on Profiles
Supports Asian
Languages
(6)
(6) Chinese, Japanese, and Korean languages are supported at the time of publication.
Cat. No. Type
20-COMM-B BACnet MS/TP
Not Compatible
20-COMM-C ControlNet
(Coax)
v3.001
(4)
v3.001
(4)
(4) Requires this adapter firmware revision or higher.
(5)
(5) Requires firmware revision v1.05 or higher of the drive Add-on Profiles for RSLogix 5000® version v16 or higher.
v3.001
(4)
20-COMM-D DeviceNet
(2)
(2) Controller must be able to read/write 32-bit floating point (REAL) values.
Not Compatible
20-COMM-E EtherNet/IP v4.001
(4)
v4.001
(4) (5)
v4.001
(4)
20-COMM-H RS-485 HVAC v2.009
(3)(4)
(3) Supports all three modes of operation (RTU, P1, N2).
Not Compatible
20-COMM-K CANopen v1.001
(4)
20-COMM-L LonWorks v1.007
(4)
20-COMM-M Modbus/TCP v2.001
(4)
v2.001
(4)
Not Compatible v2.001
(4)
20-COMM-P ControlNet
(Fiber)
v1.006
(4)
v1.006
(4)
Not Compatible
20-COMM-Q PROFIBUS DP v3.001
(4)
v3.001
(4) (5)
v3.001
(4)
20-COMM-R
(1)
(1) This item has End of Life status.
Remote I/O
(2)
Not Compatible
20-COMM-S RS-485 DF1
(2)

Table of Contents

Other manuals for Allen-Bradley 20F

Related product manuals