158 Rockwell Automation Publication 750-IN001P-EN-P - April 2017
Chapter 4 Power Wiring
Table 13 - Wall Mount Frames 6 and 7 Power Terminal and Termination Point Locations
Wall Mount Frame 6
Wall Mount Frame 7
400/480V drives shown.
No. Name Description
1 Power terminals R/L1, S/L2, T/L3, U/T1, V/T2, W/T3
2 PE grounding studs Terminating point to chassis ground for incoming AC line and
motor shield.
3 DC Bus and brake terminals +DC, -DC, BR1, BR2 (optional)
4 PE-A and PE-B MOV and CMC jumpers
5 DC+ and DC- Bus voltage test points
To Next Page
Loading...
