32 Rockwell Automation Publication 750-IN001P-EN-P - April 2017
Chapter 2 Prepare for Installation
Figure 7 - Floor Mount Drive-assembly Access Panels – All Enclosure Types (IP20, NEMA/UL Type
1 shown)
To remove or replace the covers, use this tool and torque:
• Recommended torque = 2.8 N•m (25.0 lb•in)
• Recommended screwdriver = 6.4 mm (0.25 in.) flat or T25 Hexalobular
No. Description
1 Left front converter cover with side shield (AC input drives)
2 Right front converter cover (no control pod)
3 Left front converter cover with side shield (common DC input drives)
4 Right front converter cover (with control pod)
5 Inverter front cover with side shield (common DC input drives)
To Next Page
Loading...
