Rockwell Automation Publication 1789-UM002K-EN-P - January 2015 261
Appendix G
SoftLogix 5800 Revision History
This appendix summarizes the revisions to this manual. Reference this appendix
if you need information to determine what changes have been made across
multiple revisions. This may be especially useful if you are deciding to upgrade
your hardware or software based on information added with previous revisions of
this manual.
SoftLogix 5800 Version 23
SoftLogix 5800 Version 21
SoftLogix 5800 Version 20
Change
General SoftLogix 5800 release to coincide with the Studio 5000 Logix Designer application version 23
Change
The Studio 5000 Logix Designer application has now replaced RSLogix5000 software
Studio 5000 has been added
Change
New content redesign places a small Table of Contents before the introductory text in each section to better assist you
with locating information.
The RSLinx software module can be programmed for another slot in the virtual chassis monitor other than default
Slot 0.
To Next Page
Loading...
Need help?
General
