Amada WELD CHECKER MM-400A - Page 241

MM-400A
12. Data Communication
12-20
7) SCHEDULE
Regardless of standard specification (no force/displacement), specification with
force/displacement specification, or seam specification, data is transmitted in
order of a) b) c)... as follows.
For data contents, refer to data contents of each item number.
a) Item No. 11 VIEW
b) Item No. 12 BASIC SETUP (common to all schedules), BASIC SETUP
(schedules 1 to 127)
c) Item No. 13 EXTEND SETUP (common to all schedules), EXTEND SETUP
(schedules 1 to 127)
d) Item No. 14 SYSTEM SETUP
e) Item No. 15 SEAM SETUP (common to all schedules), SEAM SETUP
(schedules 1 to 127)
f) Item No. 16 COMPARATOR (schedules 1 to 127)
g) Item No. 17 ENVELOPE (common to all schedules), ENVELOPE (schedules
1 to 20)
h) Item No. 18 EXT INPUT/OUTPUT
i) Item No. 21 PRINT
j) Item No. 22 COMMUNICATION
k) Item No. 23 USB
l) Item No. 24 INTERNAL MEMORY