To Next Page

To Previous Page

www.analogway.com

USER MANUAL

5 Using the WebRCS

Fig. 4 - WebRCS Interface

The WebRCS is the main controller for the LivePremier. It is embedded in all units and compatible with all

operating systems. LivePremier can be operated from any computer via wired network connection without

installing any software.

LivePremier can also be controlled from their specific controller currently under development (coming in

2020).

Note: Control can also be integrated into automation and control systems, for more information, contact your local technical support.

5.1 Run the WebRCS

WebRCS requirements

- 1Gb Ram

- 200Mb of free space

- 100Mb Network adaptor or above

- 1920x1080 is the minimum and optimized screen resolution

Operating system:

- Windows 7 or above

- Mac OS v10.7 or above

- Ubuntu v10 or above

- Linux OS 11 or above

Web browser:

- Chrome (Recommended)

- Firefox

- Edge

- Opera

- Safari

Recommendation: Use the latest version of the web browser and keep it up to date.

The WebRCS is based on HTML5 and does not require Flash. It is optimized for Chrome web browser in full

screen mode.

Analog way LivePremier Series User Manual

Other manuals for Analog way LivePremier Series