EasyManuals Logo

Analog way LivePremier Series User Manual

Analog way LivePremier Series
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Dashboard Firmware / Hardware (Firmware Update)
Prerequisite: Go to www.analogway.com and download the latest LivePremier updater.
Note: In some cases, updating the LivePremier unit may reset the Configuration (check the Release notes).
Tip: Export a configuration to recover it after the update (see Import and Export configuration page 18).
5.3.2.1 Update Firmware from WebRCS
1. Go to Dashboard > Firmware / Hardware.
2. Load the updater file in the WebRCS using the file explorer or drag and drop.
3. Click Extract selected file.
The updater files are extracted and verified.
4. Click Install.
After the installation, the LivePremier unit reboots.
5. If needed, import saved Configuration.
5.3.2.2 Update Firmware from the front panel
It is possible to update the firmware from the front panel using a USB drive.
1. Load the updater file on a USB drive (root).
2. Connect the USB drive to the front panel.
The LivePremier unit automatically detects updater files on the USB drive.
If the updater file is not detected, go to Control > Scan USB device using the front panel buttons.
3. Select OK to continue.
4. The available updater files are displayed, select a file.
The updater files are extracted and verified.
5. Select Update.
After the installation, the LivePremier unit reboots.
6. If needed, import saved Configuration.
5.3.2.3 Reinstall current Firmware
When a firmware is installed, the LivePremier unit saves the installer of the current firmware in its memory.
It is possible to reinstall the current firmware if needed (ex: update an input/output connector card).
1. Go to Dashboard > Firmware / Hardware.
2. Click Extract current version.
The updater files are extracted and verified.
3. Click Install.
After the installation, the LivePremier unit reboots.
4. If needed, import saved Configuration.
5.3.2.4 Hardware status
The Hardware status is available if needed for System check or Technical support.

Table of Contents

Other manuals for Analog way LivePremier Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Analog way LivePremier Series and is the answer not in the manual?

Analog way LivePremier Series Specifications

General IconGeneral
BrandAnalog way
ModelLivePremier Series
CategoryProjector Accessories
LanguageEnglish

Related product manuals