Analog way LivePremier Series User Manual

www.analogway.com
73
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Transitions - Right panel
Setting name
Description / Setting selection
Screen selection
Select the Screens and Aux affected by transition (by default, all Screens
and all Aux are selected).
Preset Toggle
Copy Program to Preview after the transition.
If Preset Toggle is enabled for a Screen, the layers in PGM replace the layers
in PRW during a Take or Take Cut (“swap” effect).
If Preset Toggle is disabled, the layers in PRW are copied to PGM and remain
in PRW Screens during a Take or Take Cut.
T-Bar
Transition the selection manually
Fade Out
Fade the selected screens to black
Fade In
Fade the selected screens from black to
Step Back
Revert the last change in layer settings. Does not work with a deletion.
Take Cut
Instant transition. Replace PGM layers with the PRW layers for the selected
Screens with an immediate cut effect.
The Global transition duration and the layers settings for Transitions, Speed
and Timing are Not applied.
Take
Replace the PGM layers with the PRW layers for the selected Screens.
Set the Global transition duration under the Take button
(minutes:seconds.milliseconds).
The layers settings for Transitions, Speed and Timing are applied to the
Take.

Analog way LivePremier Series Specifications

General

Brand	Analog way
Model	LivePremier Series
Category	Projector Accessories
Language	English