USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Add input to output backgrounds
Note: The input and output capacities must match.
An output has a pool of assigned images and inputs to be used as background content.
Add inputs to the output pool before they can be used as a background content for that output.
Multiple inputs can be assigned to the same output background sets.
1. In Preconfig > Inputs, select one or more inputs.
2. In the right panel, in Allow in Background Sets, select one output.
The selected inputs can now be used as background content for the selected outputs.
7.6 Preconfig > Images
In Preconfig > Images, set image capacity according to the resources needs for that image and
assign images as output backgrounds.
Image presets
The number of available image presets displayed at the same time depends on the number of IPU of the unit
and the image presets capacity.
24 image presets at capacity 1
12 image presets at capacity 2
48 image presets at capacity 1
24 image presets at capacity 2
Note: - Images of capacity 1 and 2 can be displayed at the same time.
- When an image preset is set to capacity 2, it uses the resources of the next preset and preempt it.
For more information on LivePremier units and IPUs, see IPUs, page 37.
Set images preset capacity
1. In Preconfig > Images, select one or more image presets.
2. In the right panel, set the capacity.
Note: An image capacity is set for the preset and stays the same when changing the image in the preset.
Add images to output backgrounds
Note: The image preset and output capacities must match.
An output has a pool of assigned images and inputs to be used as background content.
Add images to the output pool before they can be used as a background content for that output.
Multiple images can be assigned to the same output background sets.
1. In Preconfig > Images, select one or more Images.
2. In the right panel, in Allow in Background Sets, select one output.
The selected images can now be used as background content for the selected outputs.
To Next Page
Loading...
Need help?
General
