Analog way LivePremier Series - Content and Layer Compatibility

www.analogway.com
31
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Content and layer compatibility
An input or image with capacity 1 can be used in a layer with capacity 1 or 2:
Content with capacity 1
The content is displayed correctly but the resources are not optimized.
An input or image with capacity 2 can only be used in a layer with capacity 2:
Content with capacity 2
The content cannot be
displayed due to insufficient
layer capacity.
Note: If a 1920x1080 content is set to capacity 2, it will on be displayed in a layer with capacity 2.
Layer with capacity 1
Layer with capacity 1
Layer with capacity 2
Layer with capacity 2